As far as a female water hose fitting, we have a coupe different options depending on the length and inner diameter of the fitting you need. For instance, if you need a super long hose, that is the 25' AquaFresh Drinking Water Hose for RVs # W01-9300. For a shorter option, that is the 5' Valterra Drinking Water Hose for RVs # W01-0009.
Both of these hoses have the standard 3/4" diameter fitting. If your fitting is a different size, feel free to respond to this answer to let me know. view full answer...
If you're looking for a heated water hose like the AquaFresh Heated Drinking Water Hose for RV's # W01-5350, 50' is the longest hose we carry.
If you're looking for a standard water hose, the longest hose we carry is the Camco RV Drinking Water Hose - 5/8" Inner Diameter # CAM22803, which is 75' long.
We do not offer a hose at that length you're asking about, unfortunately. If you wanted a longer hose, you'd have to connect two # CAM22803 hoses together. view full answer...
To easily store the Camco RV Drinking Water Hose # CAM22753 that you referenced you will want to use the Stromberg Carlson Fresh Water Hose Caddy # HC-75. This caddy is 17" Wide x 6-1/2" Tall and can accommodate a fresh water hose up to 75' long.
Since you plan on using it around the house you also may be interested in the Camco Quick Hose Connect # CAM20143. This is a great solution if you have one designated faucet outside that you use. view full answer...
It sounds like you're looking for the parts you need to dump the black water tank on your RV. You should already have a waste valve connection in place with bayonet fittings on it so you will only need a sewer hose like the RhinoFLEX RV Sewer Hose w Swivel Fittings # CAM39761. This hose has a 4 prong bayonet fitting that firmly secures to the RV black-water tank and will allow you to dump your tank. This hose comes with an adapter that will allow you to fit it on 3" slip or 3", 3-1/2" and... view full answer...
The best way to select a hose for connecting your new water heater to its propane source is to match up the types of fittings required. We have propane products - hoses, regulators, tees - with all sorts of fittings so we should have what you need. Please refer to the linked page.
Water heaters such as the Atwood RV Water Heater # AT96110 use a 3/8-inch fitting like those on # 100383-36-MBS. This hose has a 3/8-inch male pipe thread (3/8 MPT) fitting on one end and a 1/2-inch female flare... view full answer...
Which waste valve you'll need for your black water tank on your RV depends on the fitting that you have on your vehicle currently. As an example, if you have a male threaded hose that fits over the waste valve you'll want to use the Valterra Waste Valve for RV Black Water Tank - 3" MPT to 3" Lug # T50C. I've linked our selection of waste valves to this answer that will allow you to choose the appropriate connection. It is recommended that you use Valterra ABS Solvent # A05-0303 to complete... view full answer...
I have a great solution for you. Unfortunately, we do not carry any a 12v or 110v system, but we do carry drill-free options. To use your current RV water lines to transfer anti-freeze, that is the Valterra Water Pump Conversion Kit for RV Winterizing # P23506LFVP. With this option, the 3-way valve permanently connects to your RV's water pump to transfer anti-freeze throughout the water lines.
If you are looking for a hand-pump option, that is the Valterra Antifreeze Hand Pump with City... view full answer...
The specific fittings and valves you need will ultimately depend on the kind of grey water tank that you plan on adding to your enclosed trailer. If there are threaded fittings or specific diameter openings on your tank, you will need to find the compatible fittings.
For a waste valve you can use something like the Valterra Twist on Waste Valve # T58. This will not be glued on because it is designed to attach to the RV side and the waste tube with bayonet adapters like the Valterra #... view full answer...
It sounds like you might want to have a look at the Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466ND13AAR, which would allow you to dump your black and gray water tanks from the same hose. This elbow fitting connects to the 3" hub on your black water drain pipe and the 1-1/2" hub on your gray water tank, and allows you to use the # F02-3112CL with your 3" spigot connection hose.
You'll need to remove your old valves to install the Bristol Double... view full answer...
In order to drain your gray water tank with the Valterra # T1001C, which has a 1-1/2" MPT end threads onto sewer system pipe, you'll want to use the Valterra Gray Water Drain Connector - 90-Degree - 1-1/2" FPT to 3/4" MPT # T01-0091VP. This will connect to the # T1001C and allow you to connect a garden hose that will allow you to drain your gray water tank.
There is not a specific hose designed for this use and the gray water tank will either be drained in this manner, dumped straight... view full answer...
For your 2005 Fleetwood Tioga 22B you're going to want to use the RV City Water Inlet with Brass Check Valve # 37262145.
This is going to be the screw on style that will fit a 1-1/2" diameter cutout, has a removable screen filter to help keep debris out, and includes a tethered rubber cap that will cover the connection when not in use.
Also, the reason I'd recommend going with the screw on style over the hose clamp, is going to be to do to the fact that it's just much easier to attach... view full answer...
When upgrading your propane tanks to a 100 lb. tank the only thing that should need to be changed on a typical propane set up is the supply hose that goes from the propane tank to your regulator. You would need a hose like the MB Sturgis Hose Assembly # 100202 which would connect your tank to the regulator and then from the regulator you should have a hose going to the the RV that distributes the propane out to your heater, stove and water heater. If you have an auto change over regulator... view full answer...
I've attached the fresh water fittings page so you can get the connections you need. I unfortunately can't give you parts without knowing the hose measurements and the tank measurements. For instance it looks like you will need the Valterra ABS Tank Fill Kit with Threaded Cap # RK909, but that kit comes with 2 elbow adapters and it looks like your current kit only has one elbow adapter.
We have 1/2 inch, 3/8 inch, and 1/4 inch straight fittings and the same in elbow adapter fittings.... view full answer...
Since we don't have a hose that's 70 feet long, you'll need to piece together a few hoses to get the length you're looking for. From the septic, I'd start with the EZ Coupler # D04-0115 with a 20 inch length and a 90 outlet for the septic tank. Then, I'd add 5 of the # D04-0200 hose extensions.
The hoses use the typical bayonet/lug fittings that are compatible with the standard 3 inch lug fitting on your RV waste valve. view full answer...
The Dometic Full-Timer RV Toilet # DOM99FR comes with its own hardware included so the only thing you could possibly need would be a longer water supply hose if your current setup up is on the opposite side of the water inlet on this toilet with little to no slack.
If you end up needing a longer hose you'll want to choose from the "faucet" fitting hoses as the "toilet" ones at hardware stores will be too large. view full answer...
For your dual 100-lb propane tanks, and your 199,000 btu water heater, I recommend using the:
-Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525, with the MB Sturgis Propane Pigtail Hose # 100019-60.
You will need two of the hoses to connect to your tank, and then to the regulator. Additionally, this regulator has a btu rating of 262,500 so you will have plenty of capacity for your water heater. view full answer...
It sounds like you're going to need the Valterra Eccentric Tank Reducer # T1041-1 which will mount directly to your 3" spigot, while the 1-1/2" hub slides over the sewer pipe.
Now you can connect to the Valterra Waste Valve for RV Gray Water Tank w/ Cap # T1001C, like you mention.
From here, you can attach the Valterra Gray Water Drain Connector # T01-0094VP for the 3/4" hose connection, or you can use # T01-0091VP if you want a 90° angle 3/4" hose connection.
We have various hoses... view full answer...
All of our shower heads are going to be only compatible with a standard 1/2" inlet, however since you have quick disconnects you'll want to use an hose with an adapter like the Replacement Hose for Empire Faucets RV Handheld Shower Sets # EM36HR with the D&W Inc. RV and Marine Quick Connect Garden Hose Adapter # PF247007.
Doing this will allow you to use a standard shower head # EM29HR without having to redo your entire setup. view full answer...
Thank you for the photo of the black/grey water drain valve on your Forest River Salem 31QBTS travel trailer. I see what you mean about this being well under the trailer and not located for convenient access.
Sometimes the presence of slide out mechanisms or other RV features can limit the placement options for the waste valve. RV makers might choose to keep the drain well under the trailer to avoid a nasty problem were it to leak while you're driving. (Consider what would happen if a... view full answer...
Technically, the ShurFlo 2088-443-144 will work as a replacement for your ShurFlo 2088-422-144, but it is not a direct replacement.
However, we do carry the:
-HydroMax RV Fresh Water Pump # P25201, which is a direct replacement for your ShurFlo 2088-422-144.
This water pump will produce 3 gallons per minute at 55 PSI, and has a maximum amp draw of 10A.
We also have had reports that the Flow Max RV Fresh Water Pump # LC689052 being a fantastic replacement for the ShurFlo 2088-422-144.
This... view full answer...
Go To Results